# Council Decision of 13 November 2012 on the signing and conclusion of the Agreement between the Government of the United States of America and the European Union on the coordination of energy-efficiency labelling programmes for office equipment (Text with EEA relevance) (2013/107/EU), Division: Accuracy


Measurements made with these procedures must in all cases have an accuracy of 5 % or better, though manufacturers will usually achieve better than this. Test procedures may specify greater accuracy than 5 % for some measurements. With knowledge of the power levels of current imaging products and the meters available, manufacturers can calculate the maximum error based on the reading and the range utilised for the reading. For measurements of 0.50 W or less, the required accuracy is 0.02 W.

---
Source: https://www.legislation.gov.uk/eudn/2013/107/schedule/ANNEX C/division/III./division/D./division/4./division/(b)/division (the official version)
Page: https://openlegislation.uk/eu-decision-2013-107/schedule-ANNEX C/division-III./division-D./division-4./division-(b)/division
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.